version 3 jetNEXUS ALB-X – Oracle E-Business Suite 12 – Deployment Guide

jetNEXUS ALB-X – Oracle E-Business Suite 12 – Deployment Guide

Pre-requisites

The following are general prerequisites and configuration notes for this guide:

  • It is assumed that the reader is a network administrator or person familiar with networking and general computer terminology
  • You must have an existing Oracle E-Business suite deployment
  • This deployment guide contains configuration procedures to configure jetNEXUS ALB-X appliances only
  • We recommend reading Oracle Support white paper: “Using Load-Balancers with Oracle E-Business Suite Release 12”. Doc ID is Note:380489.1
  • Minimum Software Version 3.53.2 (Build 1510) or later on your jetNEXUS ALB-X

Overview

The ALB-X is an Application Delivery Controller (ADC) sometimes referred to as a next generation load balancer. The ALB-X provides intelligent traffic management, scalability and fail-over for Oracle EBS servers.

This document assumes a degree of familiarity with the ALB-X GUI. For more general information on the ALB-X and the GUI, please refer to the User Guide

This document assumes that you are already familiar with the process of installing Oracle E-Business Suite.

Why jetNEXUS?

  • Layer 4 & Layer 7 Load Balancing
Application layer server health checks are able to detect and route around problems to eliminate downtime
  • Session Persistence
Cookie based or IP based session persistence. Session timers can be adjusted
  • Reverse Proxy
jetNEXUS ALB-X can provide Reverse-Proxy architecture, enabling secure remote client connections to internal resources
  • Compression
Content Compression features improve remote client performance
  • SSL Offload
Enables end-to-end secure encrypted traffic between client and load balancer, freeing the content servers from resource hungry process of encyption
  • flightPATH
jetNEXUS ALB-X is able to intelligently redirect clients to the correct resources
  • jetPACK
Quick and easy deployment using jetPACK application templates

What is a jetPACK?

A jetPACK is a simple text file that you can upload to your appliance that contains all of the configuration needed to deploy an application such as Oracle E-Business Suite.

  • The jetNEXUS ALB-X can be configured automatically with an Oracle EBS “jetPACK” template, which is fully-tuned with all of the application-specific settings that you need in order to enjoy optimised service delivery from your ALB-X
  • If you supply the virtual IP address and real server IP addresses to support@edgenexus.io we will send you a custom jetPACK that you simply upload to your jetNEXUS ALB-X
  • The upload can be done via the GUI and will result in a fully configured ALB-X within less than 1 minute
  • The relevant jetPACK can be applied to multiple jetNEXUS ALB-X appliances saving valuable time and eliminating simple mistakes
  • For more information please go to our website https://appstore.edgenexus.io/user-guides-version-3-32bit-jetnexus-software/current-user-guide/jetpack/#OracleESSL

Oracle E-Business Suite 12 Description

Oracle E-Business Suite is the most comprehensive suite of integrated, global business applications that enable organisations to make better decisions, reduce costs and increase performance.

For more information see http://www.oracle.com/us/products/applications/ebusiness/overview/index.html

Example Oracle E-Business Diagram

Diagram 1.1
ebs-visio

Port Requirements

Service Name Service Type TCP Port Description
Web Front End HTTP 80 Used to provide HTTP access to Oracle EBS app servers
Secure Web Front End HTTP 443 Used to provide SSL secure access to Oracle EBS app servers.
Telnet Layer 4 TCP 10300 Used to provide telnet access to the Oracle EBS app servers

HTTP Deployment

Please complete the following procedures:

1. Create a Virtual Service for HTTP

  • Navigate to the IP Services page
  • Click Add IP to add a blank row in top Channel Details section
  • Complete the column details as per the screen shot below
  • Note the Primary column will be blank unless you have enabled failover. Please see section on failover / high availability in the online user guide here
  • Start by double clicking on IP Address column of your blank row
  • Once complete you can TAB to the next column to edit

2. Add Real Servers to the Virtual Service

  • With the Destination Tab highlighted click Add New in the bottom Content Servers section.
  • A blank row will appear. Double Click on this row below each column starting with the IP Address column to add your servers
  • To save the server details click the Update button on the right hand side of this section.
  • You can add additional servers with the Add New button

ebs-ipservices-http (1)

3. Create a Server Health Monitor

Navigate to Configure–Content Server Monitoring

  • 1.Add a new health check by clicking Add Records
  • 2.In the name section double click to edit and then type Oracle EBS Health Check
  • 3.In the Description section add a suitable description of the health check
  • 4.Choose HTTP 200 OK as a Monitoring Method
  • 5.Set the Page Location to /
  • 6.Leave the required content blank
  • 7.A new monitor will now be added to the list and can be selected from the Actions section of the IP Services page

ebs-healthcheck (1)

4. Set the Actions for the channel

Apply the following actions:
ebs-actions-http (1)

Note: Cookie based load balancing tells the client to set a cookie which is associated with a particular Oracle server to maintain session persistence (sticky sessions).
The default settings for this cookie will need to be altered for Oracle E-Business Suite to remove the HTTP Only flag and set a timeout of 12 hours. Please see the jetPACK section for these updates.

HTTPS Deployment

Before you can use the ALB-X as an SSL proxy you must create or import an SSL certificate.

To create or import an SSL certificate please refer to the Configure–SSL Certificates section of the online userguide. You can open up a new tab to this resource here

1. Create a Virtual Service for HTTP

  • Navigate to the IP Services page
  • Click Add Port to add a partially configured row in top Channel Details section. The IP address and Subnet Mask will be completed for you
  • Complete the column details as per the screen shot below
  • Start by double clicking on Port column of your partially completed row
  • Once complete you can TAB to the next column to edit

2. Add Real Servers to the Virtual Service

  • With the Destination Tab highlighted click Add New in the bottom Content Servers section.
  • A blank row will appear. Double Click on this row below each column starting with the IP Address column to add your servers
  • To save the server details click the Update button on the right hand side of this section.
  • You can add additional servers with the Add New button

ebs-ipservices-https (1)

3. Set the Actions for the channel

The Actions settings for HTTPS/SSL offload are similar to the HTTP channel. The only difference is to apply an SSL certificate to the client side connection (SSL). Ensure that the Content SSL is set to “No SSL”.

Below we have already created a certificate called OracleEBScertificate so we simply need to choose it from the drop down box
ebs-actions-http (1)

Telnet Deployment

Please complete the following procedures:

1. Create a Virtual Service for Telnet

  • Navigate to the IP Services page
  • Click Add Port to add a partially configured row in top Channel Details section. The IP address and Subnet Mask will be completed for you
  • Complete the column details as per the screen shot below
  • Start by double clicking on Port column of your partially completed row
  • Once complete you can TAB to the next column to edit

2. Add Real Servers to the Virtual Service

  • With the Destination Tab highlighted click Add New in the bottom Content Servers section.
  • A blank row will appear. Double Click on this row below each column starting with the IP Address column to add your servers
  • T

  • o save the server details click the Update button on the right hand side of this section.
  • You can add additional servers with the Add New button

ebs-ipservices-telnet (1)

3. Set the Actions for the channel

ebs-actions-telnet (1)

Troubleshooting

Further help can be found on the main edgeNEXUS website

Contact Us

We hope you have found this Deployment Guide informative, but if you need any clarification or further information, please do not hesitate to get in contact with edgeNEXUS Support:

E-mail support@jetNEXUS.com
Phone +44 (0870) 382 5529
Blog http://jetNEXUS.blogspot.com/

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Log in with your credentials

or    

Forgot your details?