Update Software

The Advanced–>Update Software page allows you to update the configuration and the firmware
of your jetNEXUS ALB-X.

The page is organised into the section below.

• Configuration

• Software

Configuration

Download or save a configuration file

1. To download the current configuration of the jetNEXUS ALB-X simply press the green Download Configuration button. 
2. A pop-up will appear asking you to open or save the .conf file.
3. Save to a convenient location.
4. You can open this with any text editor such as Notepad.

Upload a new configuration from a saved .conf file

1. You may upload a saved configuration file by browsing for the saved .conf file.
2. Click Upload.
3. The jetNEXUS ALB-X will apply the config and refresh the browser. If it does not, please click refresh.
4. You will be redirected to the Dashboard page upon completion.

Upload a new jetPACK

1. A jetPACK is a set of updates to the existing configuration.
2. A
   jetPACK can be as small as changing the TCPTimeout value to a complete
   application specific deployment such as Microsoft Exchange or Microsoft
   Lync.
3. You can obtain a jetPACK from support@edgenexus.io.
4. Browse for the jetPACK.txt file.
5. Click upload.
6. The browser will refresh automatically after upload. 
7. You
   will be redirected to the Dashboard page upon completion. This may take
   longer for more complex deployments such as Lync. 

Software

Upgrade the jetNEXUS ALB-X software

1. If
   your current software version is 4.0.1 (Build 1576) or above you can upgrade
   using the method below. Please email support@edgenexus.io if
   you are running a software version below 4.0.1 (Build 1576).
2. You can obtain the latest update version from our FTP server HERE or our DropBox HERE. The file will be in the format ALB-X-Update-64-<version-build>.tar.gz.keyed.
3. Browse for the update file.  Do not try to alter this file.
4. Click Upload.
5. The jetNEXUS ALB-X will upload the file and continue to work as normal whilst uploading.
6. Once the file has been uploaded the jetNEXUS ALB-X will reboot to apply the software update.
7. This should take around 5 minutes. Your services will be inaccessible until the software has been applied.

Revert to a previous jetNEXUS ALB-X software version

1. You can revert to a previous version of software.
2. Browse for the file.  Please email support@edgenexus.io if you don’t have a previous version of software.
3. Click upload.
4. The jetNEXUS ALB-X will upload the file and continue to work as normal whilst uploading.
5. Once the file has been uploaded the jetNEXUS ALB-X will reboot to apply the software update.
6. This should take around 5 minutes. Your services will be inaccessible until the software has been applied.